Common Parameter Setting
Users can set specific parameters for the inverter, such as start/stop, power generation compensation, standby time, etc.
Prerequisites
The user has the permission of general parameter setting.
The device supports the parameter setting.
Background information
The initial grid-connection setting has been performed on the device.
Procedure
1.Select a desired plant from the left plant list.
2.Select desired plant devices from the device information list.
3.Click “Common parameter settings” to enter the corresponding interface.
4.Set system parameters/protection parameters/power control parameters.
Energy management parameter is available for energy storage inverters.5.Click “Apply settings”.
6.Enter the login password on the pop-up window and enter the setting interface.
7.Enter the task name on the “Settings” interface, select “Instruction valid period”, and click “Confirm”, so that the system generates parameter delivery task. The “Instruction valid period” can be set to 0.5h, 1h, or 72h.
If the delivered instruction has not been executed within the set time, the instruction will turn to be invalid.
8.Automatically enter the “Task list” interface. Click “View” on the operation bar to view the corresponding task. Click “Cancel the task” to cancel the latest parameter setting.
One-click Update
Enter the parameter setting page, select desired plant devices from the device information list，then click “Common Parameter Settings”。
When there is a device to be updated, the interface will pop up to remind to update, the interface shows the device type, device model and the corresponding update package of the device to be updated.
Click “One-Click Upgrade” to bring up the firmware update interface, displaying the task name.
Click “View Update Details” to bring up the task list and view the device upgrade information.
If a device is currently being updated, the parameter setting interface will pop up, click “View upgrade details” to view the upgrade information of the device.
