More
Tap “More” to enter the corresponding screen, on which you can perform WLAN configuration, settings, update firmware, etc.
Description of parameters on the “More” screen
| Parameter | Description |
|---|---|
| WLAN Configuration | The WiFi module can be connected to the home network, so that the inverter can communicate with the iSolarCloud server. Users can view inverter data or send instructions to control the inverter through the App. |
| Settings | Tap “Settings” to set inverter system parameters, operation parameters and protection parameters. |
| Firmware update | Tap “Firmware Update” to upgrade the firmware of the inverter. |
| Software version | Tap “Software Version” to view the version of the software. |
WLAN Configuration
Prerequisites
You have already got the account and password from the distributor/installer or SUNGROW.
The inverter has been connected with the WiFi wireless communication module researched by SUNGROW.
You have got the WLAN name and password of the home network.
Procedure
Enter the account and password on the login screen and tap “Login”, to enter the App home screen.
Tap “More” on the navigation bar to enter the corresponding setting screen.
Tap “WLAN Configuration” to enter the corresponding screen.
Connect to the inverter WLAN. For Android system, tap “Settings” to automatically enter the wireless network screen. For iOS system, manually switch to “Settings-WLAN”. Select the inverter WLAN named in the form of “SG-WiFi module serial number”, where the serial number can be found on the side of the WiFi module.
- Prompt information will pop up once you successfully connect to the inverter WLAN.
- Tap “Next” at the lower part of the screen to connect the inverter to the home network. Select the home network WLAN and enter the password. The symbol “√” indicates a successful connection to the home network WLAN.
- Tap “Next”, and information indicating a successful connection to the home network will pop up. Tap “Complete” to finish the WLAN configuration.
Alternatively, you can tap the icon 
in the upper right corner on the login screen and select WLAN configuration to configure the WLAN.
Disconnect the mobile phone from the inverter WLAN to ensure the phone can normally access the Internet. Then connect the mobile phone to the home network, or enable the "Mobile data".
Parameter Setting
Tap “Settings” to enter the parameter setting screen.
You can set inverter system parameters, running parameters and protection parameters.
Parameter ranges and default values will update from time to time, and the actual screens prevail. If there are any questions, contact SUNGROW.
Firmware Update
This section describes how to upgrade inverter firmware.
Prerequisite
The user has the permission of upgrading firmware.
Procedure
Obtain firmware upgrade package. You can obtain the upgrade package in the following two manners:
Tap the icon
in the upper righter corner of the login screen and select “Firmware download”, to enter the “File list” tab by default. Select the desired upgrade package (.zip). Tap the icon 
. The downloaded package can be found in the “Downloaded” tab.Contact distributor/installer or SUNGROW to obtain the firmware upgrade package (.zip). Store the upgrade package in the specified folder.
- Android: root directory /iscFiles
- iOS: Connect the mobile phone to the computer through a data cable, find iSolarCloud App via iTunes, iMazing, or iTools, and copy the upgrade package to the folder “Documents/update”.
Log into the iSolarCloud App. Specifically, refer to “Login”.
Tap “More” on the navigation bar and select “Firmware Update” to enter the corresponding interface.
Select the desired upgrade package and tap “Confirm” on the pop-up dialog box.
Wait for package uploading, after which the upgrade ends.
With the WiFi wireless communication module upgraded from unencrypted version to encrypted version, when creating power plants or configuring WLAN, the password required is the S/N of the communication module.
