Plant List

Click “Plant list” to enter the corresponding interface, on which information such as power installed, real-time power, daily yield, alarm, and communication is displayed.

Plant Search Bar

Quick search: select alarm status, enter the plant name, device S/N and power installed, click to view the corresponding plant list.

Detailed search: select alarm status, enter the plant name, device S/N and power installed, click . Select plant type and organization name, click to view the corresponding plant list.

Create Plant

Click创建电站的图标on the homepage to enter the corresponding page by default.

Create Plan

A single plant can be created. Perform the following operations according to actual condition.

Viewing Basic Plant Information
Parameter name Description
* Plant name The name of a plant is the device serial number by default.
*Plant type Click to select the corresponding plant type.
*Installed power (kWp) Input installed power.
*Country (Region) Clickto select the country (region) of the plant.
*Time zone Clickto select the time zone where the plant is located.
*Grid-connection type Click to select the corresponding grid-connection type.
Grid-connection date Click to select the grid-connection date.
Plant picture Click to upload a plant picture.

Note: * indicates required fields.

Plant location

Plant location, which can be added in two ways:

Parameter name Description
*Plant address Fill in the specific address of the plant
Postcode Fill in the postcode of the plant location
*Longitude Fill in the longitude of the plant location
*Latitude Fill in the latitude of the plant location

Note: * indicates required fields.

Owner Information

Owner’s mobile phone: used to receive SMS

Configure Tariff (Optional)
Parameter name Description
Unit Clickto select the tariff unit.
Feed-in tariff The price of electricity sold to the grid. Enter tariffs in either of the following ways.
1.Enter feed-in tariff.
2.Turn on time-of-use tariff and fill in the feed-in tariff in different time segments.
Consumption tariff The price of electricity purchased from the grid. Enter tariffs in either of the following ways:
1.Enter grid tariff.
2.Turn on time-of-use tariff and fill in the grid tariff in different time segments.
Add Communication Device (Optional)

Communication devices can be added in either of the following ways.

Click “Create Plant” below to finish adding.

Create Plants in Batch

Import plants in batches. Perform the following operations according to actual condition.

Plant Information
Parameter name Description
*Plant type Residential
*Country (Region) Clickto select the country (region) of the plant.
*Time zone Clickto select the time zone where the plant is located
Batch Import:
Overview

To view information about the plants that are being created.

Filter Columns

Clickto check the indexes needed to be checked, such as communication, transient irradiance, PR values, etc.

Refresh Interval

The refresh interval is 5 min by default (the minimum refresh interval). Tick “Refresh Interval”, and click to increase the value or click to decrease the value.

Click to refresh the plant list immediately.

Plant Information List

Click the plant name to enter the device information interface of the plant by default. Click “Overview” tab to enter the single plant overview interface.

Click the alarm icon to jump to the alarm management interface.

Click to jump to the “Plant Unit” interface.

Clickto reorder the list.

IV Curve Online Diagnosis

Click the plant name to view the detailed plant information.

Click “Advanced” to enter the corresponding interface, on which you can perform unit level scanning and inverter level scanning(See “Intelligent Analysis - Smart IV Curve Diagnosis”).