Parameter Setting

This section describes how to set plant or inverter parameters.

Prerequisites

The user has the permission of the “Smart IV Curve Diagnosis”.

Procedure

1.Click “Advanced -> Smart IV Curve Diagnosis” to enter the corresponding interface.

2.Click “Setting” on the operation bar to enter the “IV Intelligent curve analysis” interface. Enter the “Plant parameter” interface by default.

3.Perform the following operations if necessary.

a.Single setting: After finishing parameter setting, click “Confirm”.

b.Batch settiong: After finishing parameter setting, click “Confirm and copy”. Select the inverters that require the same settings, click “Confirm”.